<form id="99h99"><form id="99h99"></form></form>

      <form id="99h99"></form>

      <em id="99h99"><form id="99h99"></form></em>

          <form id="99h99"><form id="99h99"></form></form>

          首頁 > 我們的產品 > ErgoSIM物理環境工效學 > 物理環境測試 > BAPPU作業環境分析系統

          BAPPU作業環境分析系統

          產品時間:2017-09-29

          產品概述:

          Using the BAPPU Anemometer air movements or draughts as well
          as power characteristics of exhaust pumps in laboratories may be
          seized.
          Because of the unique combination of BAPPU measurements
          furthermore the cosyness* in office rooms may conveniently
          examined. (*As requierd in german laws and safety ordonnances.)
          The device has to be connected via BAPPU`s serial
          interface and is automatically switched on by the
          activities on the interface. The lighting of a red luminescent
          diode marks readiness for use.
          The connection of a special adaptor facilitates the
          simultaneous data transfer to BAPPU and from BAPPU
          to a PC so that long term recordings may be carried out
          without problems.
          As already known from BAPPU standard unit in general
          great importance was attached to a simple and
          practically orientated operation.
          Caused by the increasing use of air conditions or aerators in offices
          and administration espacially in this sector the seize of air
          movements has become more and more important.
          Beside the “stand alone“ recording of draught values in traditional
          working areas first the combination of the measurements temperature,
          rel. humitdity and air velocity as realized in the BAPPU
          conception facilitates their assessment and classifying in analyses
          as requierd by health protection ordonnances*. (*In germany)
          In dependency to the factors temperature and humidity draught may
          be felt as unpleasant even if air velocity is low. The BAPPUanemometer
          therefore has been developed for the recording of
          even very modest air velocities. (Range 0,0 m/sec - 5 m/sec).
          To guaranty a most simple and convenient operation the measuring
          feeler of the anemometer was designed as a ball. This permtits air
          velocity measurements almost indipendently from the direction of
          the air stream.
          The measuring-section “air velocity” embraces 4 single measurements.
          Beside the seize of current values 3 averages over 3 minutes
          may be ascertained in different altitudes, corresponding to the most
          draught-sensitive areas of the human body (ankle, pelvis and neck) .
          The operation of measurments as well as all other functions
          (”Hold”, “Function”...) correspond to the proceeding when working
          with the basic BAPPU device.
          To carry out air velocity measurements conveniently a stopwatch
          was integrated to check the run of the requierd 3
          minutes for the singele measurements. “Run” is on
          display until the necessary duration is over.
          Beside the recorded air velocity value the
          parameter “temperature in °C” (measured in the air stream by a
          seperate feeler) which is necessary for the assessement of the
          measurement, is represented on the instruments display.
          All recorded data is clearly shown on the display and confrontated
          to their thresholds as determined in health and safety regulations.
          These thresholds may be entered by the user himself based on
          the requierments published in national laws. The result of the
          examination is represented on the display (value in recommended
          range, value tolerable, value non conform) and
          supported by the lighting of a luminescent diode in traffic colours.
          To be able to execute averages over a 3 minutes duration or longterm
          recordings with the additional PC software BAPPU-Time the
          anemometer has been equipped with a tripod-fastener on the
          instruments back side.
          A table stand is part of
          the delivery.
          In case of an afterwards
          supplementation
          of a BAPPU
          device with a thermo-
          anemometer
          the transport case
          will be modified as
          represented in the
          illustration.
          Illustr.: BAPPU,
          anemometer
          and equipment
          in shockresistant
          ABS transportation
          case
          Overview
          Operation
          BAPPU-anemometer
          Adding the BAPPU anemometer integrates a further measuring
          section into the BAPPU-conception. Air velocity may now be
          measured reliable within orientational measurements.
          The immediat assessement of recordings by comparison to user
          edited thresholds on the display is carried out in the same manner
          as already known from the basic device measurements.

          • 產品介紹
          • 留言框

          Using the BAPPU Anemometer air movements or draughts as well
          as power characteristics of exhaust pumps in laboratories may be
          seized.
          Because of the unique combination of BAPPU measurements
          furthermore the cosyness* in office rooms may conveniently
          examined. (*As requierd in german laws and safety ordonnances.)
          The device has to be connected via BAPPU`s serial
          interface and is automatically switched on by the
          activities on the interface. The lighting of a red luminescent
          diode marks readiness for use.
          The connection of a special adaptor facilitates the
          simultaneous data transfer to BAPPU and from BAPPU
          to a PC so that long term recordings may be carried out
          without problems.
          As already known from BAPPU standard unit in general
          great importance was attached to a simple and
          practically orientated operation.
          Caused by the increasing use of air conditions or aerators in offices
          and administration espacially in this sector the seize of air
          movements has become more and more important.
          Beside the “stand alone“ recording of draught values in traditional
          working areas first the combination of the measurements temperature,
          rel. humitdity and air velocity as realized in the BAPPU
          conception facilitates their assessment and classifying in analyses
          as requierd by health protection ordonnances*. (*In germany)
          In dependency to the factors temperature and humidity draught may
          be felt as unpleasant even if air velocity is low. The BAPPUanemometer
          therefore has been developed for the recording of
          even very modest air velocities. (Range 0,0 m/sec - 5 m/sec).
          To guaranty a most simple and convenient operation the measuring
          feeler of the anemometer was designed as a ball. This permtits air
          velocity measurements almost indipendently from the direction of
          the air stream.
          The measuring-section “air velocity” embraces 4 single measurements.
          Beside the seize of current values 3 averages over 3 minutes
          may be ascertained in different altitudes, corresponding to the most
          draught-sensitive areas of the human body (ankle, pelvis and neck) .
          The operation of measurments as well as all other functions
          (”Hold”, “Function”...) correspond to the proceeding when working
          with the basic BAPPU device.
          To carry out air velocity measurements conveniently a stopwatch
          was integrated to check the run of the requierd 3
          minutes for the singele measurements. “Run” is on
          display until the necessary duration is over.
          Beside the recorded air velocity value the
          parameter “temperature in °C” (measured in the air stream by a
          seperate feeler) which is necessary for the assessement of the
          measurement, is represented on the instruments display.
          All recorded data is clearly shown on the display and confrontated
          to their thresholds as determined in health and safety regulations.
          These thresholds may be entered by the user himself based on
          the requierments published in national laws. The result of the
          examination is represented on the display (value in recommended
          range, value tolerable, value non conform) and
          supported by the lighting of a luminescent diode in traffic colours.
          To be able to execute averages over a 3 minutes duration or longterm
          recordings with the additional PC software BAPPU-Time the
          anemometer has been equipped with a tripod-fastener on the
          instruments back side.
          A table stand is part of
          the delivery.
          In case of an afterwards
          supplementation
          of a BAPPU
          device with a thermo-
          anemometer
          the transport case
          will be modified as
          represented in the
          illustration.
          Illustr.: BAPPU,
          anemometer
          and equipment
          in shockresistant
          ABS transportation
          case
          Overview
          Operation
          BAPPU-anemometer
          Adding the BAPPU anemometer integrates a further measuring
          section into the BAPPU-conception. Air velocity may now be
          measured reliable within orientational measurements.
          The immediat assessement of recordings by comparison to user
          edited thresholds on the display is carried out in the same manner
          as already known from the basic device measurements.

          留言框

          • 產品:

          • 您的單位:

          • 您的姓名:

          • 聯系電話:

          • 常用郵箱:

          • 省份:

          • 詳細地址:

          • 補充說明:

          • 驗證碼:

            請輸入計算結果(填寫阿拉伯數字),如:三加四=7



          上一個:三屏駕駛模擬器

          下一個:ErgoLAB人機環境同步云平臺


          人因工程與工效學

          人機工程、人的失誤與系統安全、人機工效學、工作場所與工效學負荷等

          安全人機工程

          從安全的角度和著眼點,運用人機工程學的原理和方法去解決人機結合面安全問題

          交通安全與駕駛行為

          人-車-路-環境系統的整體研究,有助于改善駕駛系統設計、提高駕駛安全性、改善道路環境等

          用戶體驗與交互設計

          ErgoLAB可實現桌面端、移動端以及VR虛擬環境中的眼動、生理、行為等數據的采集,探索產品設計、人機交互對用戶體驗的影響

          建筑與環境行為

          研究如何通過城市規劃與建筑設計來滿足人的行為心理需求,以創造良好環境,提高工作效率

          消費行為與神經營銷

          通過ErgoLAB采集和分析消費者的生理、表情、行為等數據,了解消費者的認知加工與決策行為,找到消費者行為動機,從而產生恰當的營銷策略使消費者產生留言意向及留言行為

          銷售熱線:
          400-811-3950

          郵箱:
          sales@kingfar.cn

          掃一掃,關注我們

          掃一掃,聯系我們

          欧美激情网址_欧美专区高清_老司机福利s_天天摸日日干_中文有码电影